Fill2Pure pH ALKALINE Water Filter Jug 3 Litres

Fill2Pure pH ALKALINE Water Filter Jug 3 Litres

Our pH Alkalising water filter jug naturally and instantly alkalises water while filtering out major contaminants. This portable filter alkalinises as it filters for a fraction of the price of buying alkaline water.

Up to 9.5pH Alkalinity - pH level remains Stable for Weeks

600 Litre Filter Capacity

This water filter jug alkalises the water and filters out contaminants suitable for use throughout the developed world. No need for expensive Ionisers - this portable filter alkalises instantly as it filters for a fraction of the price of buying alkaline water. The filteration capacity is 600 litres or approximately 200 refills of the jug.  The pH level of the water varies depending on the pH level of the source water. Due to the different pH levels in different water sources, in some cases the pH alkalising minerals may not last the full length of the Jug filter capacity (600 litres). There is no need to count the litres, our filters will not expire, but the flow will go slower and slower until it is time to change the filter.  Anything that comes through is safe and pure.  We remove the same amount of contaminants at the end of the filter life as we do at the beginning.

The dimensions of the Jug are 29cm long from spout to handle, the width is 13.5cm, and the height is 26cm.

 We recommend you keep your filter Jug in the fridge to prolong the filter life, especially in Summer as the filter works harder when it is warm to prevent bacterial growth and this can clog up your filter life more quickly.

Different water sources have different pH and contaminant levels, our filter capacity is approximately 600 litres, and we filter the exact same percentage of contaminants to the last drop (Whole life filter).  Due to the different pH levels in different water sources, in some cases the pH alkalising minerals may not last the full length of the Jug filter capacity. 

What is the difference between our pH Jug and an Ioniser

Ionisers are an alternative to our alkalising jug. However, ionisers produce high pH water by magnetising or charging the water. The high pH they produce is not stable and will return to its original pH within 12-36 hours. Your body can take up to 48 hours to absorb the benefits associated with drinking alkaline water, so ionising water is not the most efficient way to produce alkaline water.

By contrast, our water filter jug uses a unique method developed by Fill2Pure to raise pH naturally, by adding beneficial minerals to the water, thus creating a stable pH that remains high for several weeks. The level of pH water you get depends on the pH of the source water, if the water is 7pH you can get up to 9.5pH. If the water is more acidic, it will still raise the pH higher than the source water.

• Improves the body’s absorption of essential nutrients
• Improves hydration
• Acts as an anti-oxidant; helps to flush acidic wastes from the body
• Makes acidic foods and drinks more alkaline
• Improves digestion
• Enhances the taste of food and drinks

Some of the many contaminants we remove include up to 99.99% of:

• Chlorine
• Arsenic
• DDT
• MTBE
• Lead
• Mercury
• Copper
• Chloroform
• Chromium 6
• PCBs
• Pesticides
• 90% + of Fluoride
• Volatile Organic Compounds
• Trihalomethanes
• Nitrates & Nitrites
• Arochlor 1260 (PCB)

The water jug also filters out up to 90% of Fluoride

Note: If you have water that is high in nitrates or sediment/silt you may not get the full capacity of the Jug filter.  The filter will remove these contaminants but may get prematurely clogged by larger particles.  This could happen with tank water or rain water if there is no pre-filter.  

Note: The jug filter casings for the pH Alkalising and Regular jugs are interchangeable. So if you buy the pH Alkaline Jug and next time you want to try the Regular Filter it will fit the same Jug. The filtering capabilities are identical between the two types of Jugs but the pH Alkaline Jug also alkalises the water as well as filtering.